Attach the adhesive about 3 centimetres ( 1.2 inches ) above the hem on the rear inside on the back of your trousers, exactly above the place where the trousers touch the floor. Press hard during 30 seconds.
For a longer lasting use*, please refer to point d).
b)
Place the Pants'Fix® around your ankle with the hanging part towards the heel and the closure part on the inside part of the ankle. Then adjust the size to fit comfortably.
c)
Match the Pants'Fix® to the stay on adhesive part inside the trousers. Adjust, if needed, the length of the Pants'Fix® to avoid letting the trousers touch the floor.
Instant use with heels:
Lengthen the vertical part of the Pants'Fix®
Place the adhesive to the velcro on the Pants'Fix® first
Adjust the pant to the lenght you wouldlike,then push to stick it
Adjust the length to compensate the elasticity of the Pants'Fix®
Long-lasting use* :
d)
WARNING :
to ensure a better adhesive resistance, round the corners of the adhesive (3) and the thermo adhesive (2) with scissors.
hold the trousers inside out, replace the adhesive if already placed for instant use (point a)), or place the thermo adhesive as per point a).
Warm up the trousers for 15 seconds with the iron at a temperature of 180°C ** ( 356.00 °F )
before placing the thermo adhesive (2), matte face against the fabric, (1) as per point a).
Apply the thermo adhesive(2) with the iron at 180°C** pressing hard with a rotating movement with an intermediary thin cotton cloth.
Let it cool down for 5 minutes before handling, remove the transparent film of the thermo adhesive(2) and place the new adhesive in the center with strong pressure for 30 seconds.
* washable several times after 24 hours of application, at 40°C, low spin-dry (max 400 rpm), standard washing powder, washing machine with filter.
** Temperature for jeans 100% cotton
We decline any responsibility in the event of damage whatever they are.
